Blown-in insulation in Topeka KS - an attic sealed first and filled evenly
Hot upstairs rooms and a climbing power bill usually start in the attic. We seal the gaps first, then blow in an even layer.
Book a look at your attic insulation
Call (785) 246-7785 or use the form, and tell us how deep the insulation looks and whether a furnace or water heater sits up there, so I know what I'm climbing into.
Does your Topeka attic need more blown-in insulation?
Blown-in insulation is loose fill, usually fiberglass or cellulose, that we blow through a hose across your attic floor. In Topeka it's the quickest way to give the whole ceiling, right out to the top of the walls, a proper layer that slows heat.
Most people call us because the upstairs is hot in July, the room over the garage is cold in January, or the power bill keeps climbing, and the attic is usually where it starts. The price depends mostly on the attic itself: how big it is, how many gaps need sealing before we blow, and whether any old insulation has to come out first. The schedule turns on the same things, plus how easy the attic is to get into and move around in. The estimate is where you get the plan for your own attic, because I walk it with you and explain what I'd do and in what order.
Why Topeka homeowners call us for blown-in insulation
I look at every attic myself
I come out to every estimate, and I'm on site for most installs while our crew works. The person who planned your job is the one making sure it gets done that way.
A Topeka business since 2020
I learned this trade crawling through attics with my dad, and I started this business here in Topeka in 2020. That's six years of seeing what local attics hide under the old fill.
Licensed and insured, every job
We're licensed and insured, so you aren't the one carrying the risk of a crew working over your ceiling. That matters in an attic, where one wrong step puts a foot through the drywall.
On an attic job, the order of the work matters more than how many bags go in. Tell us about your attic or call (785) 246-7785, and I'll come take a look.
How we do blown-in insulation
First I look at what's already up there. Most attics don't need a tear-out, so if your old insulation is dry and clean, we blow new right over it. In houses from the 1930s or earlier I check for knob and tube wiring, because it can be a fire hazard when insulation touches it. Next our crew seals the air leaks in the attic floor, around lights, pipes and the hatch, because sealing is far easier before the fill goes in, and the new insulation can't do its job while a draft blows through it. We keep the soffit vents at the eaves clear so the attic keeps breathing. Whoever you hire, the estimate should list baffles, also called rafter vents, which hold the insulation back so air can still move. We build a dam around the hatch so the insulation stays in the attic and out of your hallway. Last, we blow the fill across the whole ceiling and keep it as level as we can out to the edges, because a deep middle with thin edges is the most common way this job goes wrong.
Sometimes the attic is only part of the problem. If cold floors or drafty walls go past what the attic can fix, we can look at the rest of the house as home insulation work on the same visit. If the old insulation is wet, moldy, smells or has droppings in it, new fill on top just keeps the problem, so it comes out first through our insulation removal work.
Fiberglass loose fill
Spun glass with some recycled content, light and quick to blow over a ceiling. It's a good fit when you're topping up existing fiberglass and want the new layer to match the old.
Cellulose loose fill
Ground-up recycled paper that fills in around wires and odd framing well, so it suits older attics full of corners. Like fiberglass, it's an inexpensive and safe material.
How can you tell your attic insulation is falling short?
Hot rooms upstairs
The upstairs stays hot into the evening while the AC runs and runs. Heat is usually soaking down through a thin attic, and every summer you wait shows up on the power bill.
Cold room over the garage
The room over the garage is cold underfoot all winter. The insulation there is usually thin, missing or knocked loose, so the furnace works overtime trying to keep up.
Drafts at lights and hatch
You feel cold air at the attic hatch or around ceiling lights. Those gaps leak house air into the attic, and burying them under new insulation just gives you a nicer looking leak.
Stained or musty insulation
The attic smells musty, the insulation looks matted or stained, or you spot droppings. Water or animals have usually gotten in, and that has to be dealt with before anything new goes on top.
What happens when you call about blown-in insulation in Topeka?
Call and I come out
You call (785) 246-7785 or send the form, and we get back to you. I come out, look at the attic and tell you what I'd do, in what order, and what has to be fixed first.
Our crew seals and blows
If you go ahead, our crew does the work in the order I laid out, and I'm on site for most of it. Keep the hallway under the hatch clear, because that's where the crew comes and goes.
We clean up and walk it
We clean up when the fill is in, then walk the attic with you. You see the finished depth, the open vents and the dam at the hatch before we leave.
Blown-in insulation questions from Topeka
These are the questions I hear most on Topeka attic estimates. If yours isn't here, call, send the form or email support@topekainsulationcompany.com and ask it about your own house.
How much does blown-in insulation cost in Topeka?
Blown-in is one of the less expensive ways to insulate an attic, because fiberglass and cellulose are both inexpensive materials, and your cost comes down to the prep your attic needs. Topping up over dry, clean insulation costs less than clearing it out and starting over, and a lot of sealing work adds to the bill. I'll give you the plan for your attic once I've seen it.
How do I know if my attic needs more insulation?
Look into the attic, and if the insulation sits at or below the tops of the floor joists, your house probably needs more. That quick look is enough to tell you whether an estimate is worth asking for. When you call, tell me what you saw and whether anything looked wet or dirty.
What should I do if my attic has vermiculite insulation?
Leave it alone and have an approved lab test it before anyone disturbs it, because vermiculite may contain asbestos. It's light, pea-size and flaky, usually gray. We don't start until you know what it is, and in an older attic that's a normal first step, not a reason to panic.
Where do I file a residential building permit in Topeka?
The City of Topeka takes one- and two-family residential building permit applications at 620 SE Madison, 3rd Floor, and its permit application lists 785-368-3704 as the number to call. We check with the local building office on every job and handle any permit it calls for, so that part isn't on you.
What is the best way to insulate an attic, blown-in or spray foam?
For most attics, sealing the gaps and topping up with blown-in is the better buy, and I'd only lean toward foam if your ductwork runs through the attic. Foam costs more and seals air while it insulates, which earns its keep around ducts. Everywhere else, you get most of that benefit by sealing first and blowing after.
Does a gas furnace in my attic change how you add insulation?
Yes. If a gas furnace, water heater or other fuel-burning equipment sits in your attic, have an HVAC contractor run combustion safety testing after the air sealing is done. Mention it when you call so I can plan the order around it.
Get a free look at your attic
Put your address and what's bothering you about the house in the form, and we'll reply within one business day. I'll come out for a free on-site estimate, no obligation, and walk the attic with you.
What blown-in insulation looks like
Other insulation work we do
Home insulation
When the cold spots are in the walls, floors or crawl space as well as overhead, this looks at the whole house so the attic isn't the only part that's fixed.
Learn moreInsulation removal
If a roof leak or a family of raccoons ruined what's up there, we clear it out so the new layer starts on a clean, dry attic floor.
Learn more