(785) 246-7785Mon–Fri: 8 AM–10 PM, Sat–Sun: 7 AM–9 PM
Efficient Topeka Insulation Company
Worker in protective gear sprays foam insulation onto interior walls framed with metal supports.

Expert Insulation Contractor in Topeka KS - Comfortable Rooms, Upstairs and Down

Efficient Topeka Insulation Company does attic insulation and air sealing for homes in Topeka, Lawrence and the cities around them. We also insulate walls and crawl spaces in older houses, the ones with cold floors and a hot upstairs.

  • Licensed and insured.
  • Free in-person estimates.
  • We respond within 1 business day.

Topeka insulation, done in the right order

I started Efficient Topeka Insulation Company in Topeka in 2020, after years of crawling through attics with my dad, who taught me the trade. We're licensed and insured, and we're mostly known for attics done in the right order. We work for homeowners and the occasional property manager in Topeka, Lawrence, Tonganoxie, Eudora and other cities nearby. You can read more about me and how we work.

Why homeowners hire us for insulation

A good insulation crew should look over the whole space before quoting, fix what has to come first and clean up when they're done. That's how we run our jobs.

  • Leaks sealed first

    We seal the gaps around lights, pipes and the attic hatch before any insulation goes in, so you actually feel the difference you paid for.

  • The owner stays close

    I walk your house myself and I'm on site for most of the install, so what we talked about is what gets done.

  • Problems named up front

    If I find a roof leak, old wiring or wet spots, I tell you before we start. Insulation over a leak is just a nicer looking leak.

  • Keep what still works

    If your old insulation is dry and clean enough to build on, I'll say so, and we'll top it up rather than tear it out.

Not sure what your attic needs? Send us a note on the contact page and I'll come take a look.

Insulation contractor services in Topeka, KS

Efficient Topeka Insulation Company is an insulation contractor in Topeka, and our 16 services cover the whole house, from the attic down to the crawl space, so rooms hold their heat in winter and stay cooler in summer. The price mostly turns on how big the space is, how much insulation is already there, whether old material has to come out first, and whether foam or loose fill makes sense. The schedule turns on the same things, plus anything that has to be fixed before we start, like a roof leak or old wiring. At the free estimate I walk the space with you and tell you what I'd do and in what order.

  • Spray foam insulation

    Spray foam goes on wet, expands to fill the cavity and seals air while it insulates, so it suits rim joists, odd framing and attics with ductwork in them. It costs more than loose fill, which is why I don't push it where it isn't needed.

    Learn more
  • Attic insulation

    Hot upstairs in July and drafty in January? We seal the attic's leaks, keep the eave vents clear and bring the insulation up evenly, edges included, so the rooms below hold their temperature.

    Learn more
  • Blown-in insulation

    Blown-in insulation is loose fill we blow through a hose, so it settles into corners and around joists that batts never quite reach. It's usually the simplest way to top up an attic that already has some insulation.

    Learn more
  • Home insulation

    What does a whole-house job cover? I look at the attic, walls, crawl space and basement together and tell you which ones are costing you the most, so you can start where it counts.

    Learn more
  • Insulation removal

    When old insulation is soaked or full of droppings, we vacuum it out and clean up before anything new goes in. New material over a bad layer just keeps the problem.

    Learn more
  • Crawl space insulation

    Cold floors usually start under the house. We insulate the crawl space walls or the floor above them, depending on how the space is built, so the floors stop feeling like a winter sidewalk.

    Learn more
  • Wall insulation

    Are your outside walls empty? In plenty of older houses they are, and we can fill them through small holes we patch afterward instead of tearing the walls open.

    Learn more
  • Air sealing services

    Air sealing is closing the gaps around pipes, wires, lights and hatches that let air leak through, before any insulation goes on. It's the step most jobs skip and the one you actually feel.

    Learn more
  • Basement insulation

    We insulate basement walls and rim joists, the wood band sitting on top of the foundation, so a finished basement stays warm and an unfinished one stops leaking cold into the floor above.

    Learn more
  • Closed-cell foam insulation

    Closed-cell foam is dense foam that also blocks moisture, so it's what we reach for on rim joists, crawl space walls and other spots that can get damp. It packs a lot of insulation into a thin space.

    Learn more
  • Open-cell foam insulation

    Open-cell foam is the softer, lighter foam, a good fit for rooflines and walls where you want the air sealed and the noise cut but moisture isn't the worry.

    Learn more
  • Commercial insulation

    We insulate offices, shops and rental buildings, and we work with owners and property managers to schedule around tenants and business hours.

    Learn more
  • Crawl space vapor barrier

    We lay a heavy plastic liner over the dirt floor of your crawl space and seal the seams, so ground moisture stays down there instead of drifting up into the framing.

    Learn more
  • Vapor barrier installation

    Where should a vapor barrier go? That depends on the wall or floor and which side stays warm, and we put it where it keeps moisture out of the insulation instead of trapping it in.

    Learn more
  • Attic air sealing

    Before we add an inch of insulation, we seal the attic floor around can lights, pipes, wires and the hatch, because insulation can't stop air that's blowing straight through it.

    Learn more
  • Retrofit insulation

    Retrofit work is adding insulation to a house that's already built and lived in, through the attic, the crawl space or small holes in the walls, without a remodel.

    Learn more

Where we work around Topeka

Efficient Topeka Insulation Company is based in Topeka, KS, and we take insulation jobs in Lawrence, Eudora and other cities nearby. The four cities below have their own pages, but they aren't the only places we go, so call if yours isn't listed.

How an insulation job goes with us

  1. Call or send the form

    Call (785) 246-7785 or fill out the form with what you're noticing, like a hot upstairs, cold floors or a power bill that keeps climbing. We get back to you within one business day to set a time for me to come out. The estimate is free, with no obligation.

  2. I look and tell you the order

    I come out myself and look at the attic, walls or crawl space, including how many inches are already up there and whether any of it has to go. Then I tell you what I'd do, in what order, and what has to be fixed before we touch the insulation.

  3. Our crew does the work

    If you go ahead, our crew does the install and I'm on site for most of it. We seal the leaks first, then insulate, and keep the eave vents clear so the attic can still breathe. If something new turns up once we're in there, I tell you before we keep going.

  4. Clean up and walk through

    When the work's done, we clean up and I walk it with you, so you can see what was sealed, what was added and where. If anything looks off to you, that's the time to say so, and we'll go over it together while we're both standing there.

Insulation questions we hear in Topeka

These are the questions Topeka homeowners ask us most before an insulation job. If yours isn't here, ask about your own house and I'll answer it at the estimate.

How much does attic insulation cost in Topeka?

It depends on the size of your attic, how much insulation is already up there and how much sealing it needs, so your real number comes from the free estimate. Pulling out damaged material first or choosing foam over loose fill raises it. I'll walk the attic with you and price it for your house.

Is spray foam worth the extra cost over blown-in insulation?

Usually not, unless your ductwork runs through the attic. Foam costs more and seals air while it insulates, but sealing the gaps and topping up with blown-in insulation gets most attics where they need to be for less.

How long does attic insulation take, and do we have to leave the house?

With blown-in insulation you can usually stay home while we work, and how long we're up there depends on the attic's size and how much sealing comes first. Spray foam has a re-entry time, the wait before you, the kids and the pets come back inside, and I'll tell you what it is for your job before we schedule.

Do I need a permit to insulate my house in Topeka?

We check with the city's building official on each job and handle any permit it calls for, so you don't have to sort that out yourself. Topeka's permit rules cover work that alters or repairs a building. For a home built before 1978, the city can issue a permit once it has a document from the contractor saying you got the EPA's lead pamphlet, so we'll give you a copy.

Why seal air leaks before adding attic insulation?

Because insulation slows heat but doesn't stop moving air, so a gap around a can light or the attic hatch keeps blowing through no matter how deep the fill is. Sealing first means the new insulation actually does its job. We also keep the coverage even out to the edges, where a lot of attics are thinnest.

What if something doesn't feel right after my insulation is done?

Call us at (785) 246-7785, tell us what you're noticing, and we'll talk it through with you. We stand behind the work with one promise, your satisfaction, guaranteed, and I'd rather hear about a cold room than have you live with it.

Is fiberglass or cellulose better for blown-in attic insulation?

Both work well in an attic, and the bigger difference is whether the gaps underneath were sealed first. Cellulose is denser and packs tighter around wires and framing, while fiberglass is lighter and shrugs off moisture better. I'll tell you which one I'd use in your attic and why.

Why is the upstairs so hot in summer in my Topeka house?

Usually it's an attic short on insulation, air leaks around lights and the hatch that were never sealed, or eave vents buried so the attic can't breathe. In older houses around Topeka we often find all three at once. The fix starts with finding which one is doing the most damage.

Tell us about your attic, walls or crawl space

Tell us where the house feels wrong, roughly how old it is and what's in the attic now if you know. We reply within one business day to set up a free, no-obligation visit, and I come out myself.